problems with Ganglion / Python / LSL
Hi guys.
I have followed the tutorial to setting up the 4 channel Ganglion board and it worked for the OpenBCI GUI. I used a CSR 4.0 bluetooth dongle and installed the driver using Zadig as WinUSB.
However, I want to do live streaming of the channel data into Matlab and I found the library for the Lab Streaming Layer.
LSL github repository : https://github.com/OpenBCI/OpenBCI_LSL
My python installation is completed successfully, and the problem occurs now at the board initialisation.
using the command python openbci_lsl.py --stream , it raises an OSerror that no OpenBCI port is found. (Image of the error : 
https://ibb.co/kHcNbv)
So, I went to check my device manager to see the ports available on my laptop, and I found that the bluetooth dongle is not listed under COMs. (Image of the device manager : https://ibb.co/kTuoia)
Can someone tell me what have I done wrong or installed wrongly for the bluetooth dongle? I am not that familiar with the various drivers available for CSR 4.0.
Your help is greatly appreciated.
Comments