victoria_peterson
victoria_peterson
About
- Username
- victoria_peterson
- Joined
- Visits
- 59
- Last Active
- Roles
- Member
Comments
-
Hi again! Another question regarding two MyoWare connected to the Ganglion. How should be connected each R cable to the board? I mean, since there is only one D_G pin, and I have two cables coming for the each of the ground electrodes, should I …
-
Thank you very much!
-
My problem was solved when I replaced the battery pack cable from another one! It seems that it was not well welded to the battery pack connectors ! check continuity just to be sure.
-
Yes I have, please tell me what to do, because I have test the voltaje of the batteries and all of them where around 1.6 V, thus, with the four of them I am above 6 V.
-
Thank you for your observation, but I don't really know if that is the problem, because I had done a dummy prove by plugging in the dongle in different linux pc (Ubuntu 14.06 or 16.04 ) and the blue light never appeared! On Windows, after I have i…
-
HI, the 32 bit board also have a blue light indicating that is turn on? beacause the one that do not turn on the ligth when a swith to PC mode. I use the baterry pack with 4 AA batteries.
-
Yes, the problems where the graphics drivers. I solved the problem upgrading the Intel Graphics drivers!thanks you very much!
-
Hello, I have been working hard to make OpenBCI_GUI works on my Windows 7 64 bit computer. I followed the steps that are mentioned in Connor's comment but I want to share one important thing: the program do not run if you have downloaded the la…