mystery
mystery
About
- Username
- mystery
- Location
- Russia
- Joined
- Visits
- 60
- Last Active
- Roles
- Member
- Location
- Russia
Comments
-
cleaning doesn't help me, maybe I have another problem that looks the same. Here is my log Success writing channel 0 Return code: 200 Success writing channel 1 Success writing channel 2 Return code: 200 an error was thrown…
-
Hey. I have the same problem. after pressing start, nothing happens, just a straight line on all channels
-
I solved the problem several times by rebooting the board and the computer
-
I have such a problem when starting from ide
-
It's all about poor soldering and not working the voltage regulator
-
thanks for the answer. It's all about the voltage regulator in China, I ordered two pieces from two sellers and they both were not working! I ordered such a TPS72325DBVT in my city, changed it, and the correct voltage appeared.
-
Hi. After assembling the board, without firmware. If the supply voltage is applied, should the blue LED D1 be on?
-
I seem to understand. Is there a long nut than crimped with a wire? What is the width and length of the spring? What is the length and width of the electrode holder? What wire is used there, the usual one for all connections or another?
-
are there any photo holders of electrodes in more detail, can i do something similar myself? "These are only available from the OpenBCI Shop. See the kit, Print-It-Yourself," of the similar, I found only
-
-
Hi. I think I understood a little about the firmware. thank.I would like to print the body of the electrodes myself and buy tips. I do not understand what kind of part and where to get it?