mesca
mesca
About
- Username
- mesca
- Joined
- Visits
- 13
- Last Active
- Roles
- Member
Comments
-
Downgrading to chipkit 1.3.1 worked! Thank you @pushtheworld.
-
Yeah! Can't try right now, but will confirm tonight.
-
Latest version of Arduino (1.8.5).
-
After discussing the issue with AJ @pushtheworld, he suggested that I should retry and issue a soft reset. There was no error during upload, but the output of the v command (from the Arduino serial console) is as follow: OpenBCI V3 8-16 channel On …
-
Same thing here.Yesterday, I carefully followed the instructions to update the firmware to the latest version, and now I don't get any signal from the sensors anymore. I checked the radio channel on the OpenBCI GUI ("Success: Host and Device on Ch…