jet
jet
About
- Username
- jet
- Location
- U.S
- Joined
- Visits
- 38
- Last Active
- Roles
- Member
- Location
- U.S
Comments
-
Thank you for your previous response. The site for the Shapeways 3D printed files are here: https://github.com/mindaffect/Headset; the attachment file was printed with TPU, and the main file was printed with https://shapeways.com/materials/pa11. The…
-
Hello again, I have ordered TMSi electrodes and 3D printed the headband that MindAffect uses. The issue now is that the electrode wires cannot directly connect to the Cyton board, so there must be an adapter needed. I saw on the OpenBCI shop that …
-
Hello again, I have contacted the MindAffect info contact, and they stated that https://shapeways.com/ is able to 3D print the headband, and that TMSi electrodes are available (although the servers are offline at the moment). I tried incorporati…
-
Hello there, I have been using the dry comb electrodes for my UltraCortex Mark IV headset. However, I have been receiving poor results with MindAffect; I have not been able to free type for predictive letter typing. Only on one occurrence was I abl…
-
@retiutut I changed the serial port latency on the Ubuntu VM from 16 -> 1ms, but it didn't have much of a difference. @wjcroft I am actually running a patched version of OpenVibe on an Ubuntu VM with a Windows base OS. Even when training t…