brolyss360
brolyss360
About
- Username
- brolyss360
- Location
- boston
- Joined
- Visits
- 81
- Last Active
- Roles
- Member
- Location
- boston
Comments
-
Update: I have gotten my replacement tech and it is work fantastic thank you so much @biomurph and @wjcroft. As was discussed previously in the thread one of the pins on the board was really off and most likely damaged there was some damage found o…
-
I looked it over there was like to specs of dust and I clean it off and tested again and nothing, it is still wonky.I emailed joel and referred him to this thread. Thank you for helping me out. You guys are awesome and I love your product. I really …
-
What do you mean with the word leads???Im not ready to give up. is it possible to have bad pins on the board? because I just did two tests: 1: I taped one of the smooth spring electrodes to my forehead and attached it to each pin on the boar…
-
https://drive.google.com/folderview?id=0B7epH6R9TdXWM0F1bG9jVFg2NWc&usp=sharing I had to move all my pics, my drive was getting messy. The latest pic was the readings i got with the gold cup electrodes in the solution. I want to clarify wha…
-
I don't have paste for the gold cup electrodes, as i mentioned previously in the last comment i have never used the gold cup electrodes.
-
https://drive.google.com/file/d/0B7epH6R9TdXWdzF6eEJYZjhmLXc/view?usp=sharing In the picture above I tested each of the electrodes off the headset and they all check out with ohms close to zero. On the left is the (2x) Ear-clip electrode (for re…
-
https://drive.google.com/file/d/0B7epH6R9TdXWdlZUaGZqZzM5UG8/view?usp=sharing So here I used electrode 1 as SRB2 and 6 as bias and turned off pins 2 and 7 since nothing was connected. itried to get resistance readig ewteen each pin indvidually …
-
you mean like use different electrode on srb2 and bais, or just reverse them?(have been using earlobe clips for both)
-
sorry about the images, I fixed the sharing permissions. I am in my room where I have always collected montages so no laptop chargers, no AC conduit and such. The solutions in that thread did not work for us, we tried them.
-
I am using 8 channels in the formation of the picture in the Neuromore screenshot. So i dont alligator clips so I connected the cup electrodes, stacked them together and taped them stacked. I got the following screen shots. https://drive.googl…
-
https://drive.google.com/file/d/0B7epH6R9TdXWbFRtdWp2THg4ZXM/view?usp=drive_web so now i have a new issue. The BCI chip is giveing me crazy reading, for example the movement readings from the accelerometer are going nuts and im sitting perefectly …
-
I got it Thank you YAY everything is back to normaL!
-
Ok so i received the dongle today in the mail it arrived as a channel 4 and I'm not sure how to program it to channel 5 to match my headsetI have read the tutorial here: http://docs.openbci.com/tutorials/03-Upload_Code_to_OpenBCI_Dongle But Im and …
-
oh well he's is sending me a new one, and I am sending in mine. He will be trouble shooting it to see if it is and user error fail or manufacture defect.@wjcroft I will follow up with him and ask what it was after all down the road. Or he might …
-
@wjcroft I called the brooklyn office this morning and Joel being the LEGEND he is, helped me sort something out. Thank you!
-
the dongle is not listed in my list of available serial ports $ ls /dev/tty.* /dev/tty.Bluetooth-Incoming-Port
-
Hello,My dongle seems to have a similar issue, in that it was working yesterday, then tonight I went in to just double check the connections for tomorrow's testing and boom the dongle and the BCI board will not establish a connection. BCI chip is …