bmarkus
bmarkus
About
- Username
- bmarkus
- Joined
- Visits
- 183
- Last Active
- Roles
- Member
Comments
-
Thanks Bill! Seems like they got that going well in processing, time for some copy paste. I will hopefully update soon.
-
I had noticed an issue at 1600Hz, but shrugged it off as my laptop needing replacement As coding is not my thing I've only quietly lurked on Github, dont feel competent to chat with the big boys there. I actually do have a widget for coherence…
-
I havent had any issues with Ganglion either, so for now I'll just work with that. Thanks for support, I hope issues get resolved.
-
@retiutut I see issue 231 is there, so thats too bad for now, but that pertains to the artifacts, not to UDPx3 not working. Regarding the disclaimer, I'll try some other laptops, and if that doesn't help I'll put my project on hold until 231 …
-
I tried UDPx3 today, some trouble though. First I updated firmware on both the wifi shield and cyton. Still not able to get UDPx3 to work though, after clicking 'start system' error message is that my wifi shield firmware is out of date. …
-
Haven't tried it yet, need to install latest firmware first.
-
Ok so I'll stop worrying about it thanks for your help!
-
also, my laptop is 4yr old Thinkpad with i7 and 16Gb
-
Screenshot Windows explorer will fluctuate between 8-15% During this screenshot I've got settings on UDP and 500Hz
-
Through process explorer I found out that windows defender get hyperactive within windows explorer. It is certainly related to the GUI though, because the increased activity starts and stops exactly with the GUI. Maybe its time to switch to Ubunt…
-
I'll try Process-explorer! Yes, I use Wifi shield, but never open the Headplot. Using the dongle is not an option for me as I need the higher sampling rate.
-
At first I tried with half the channels on SRB2. It worked of course. But for final version I think that all wires should be created equal
-
Hi William, I tried your solution, splicing the P pins to A1 and A2. P1,3,5,7 and on A1 and P2,4,6,8 and on A2. SRB1 and SRB2 are switched off in hardware settings. Works like a charm! Pics of splicing and resulting Alpha waves I also rea…
-
Yes, my Professor uses linked ears, but of course, he uses his own version. He doesn't actually link them. A1 for the left side, A2 for the right side, and for the central sensors he averages them in software. We look at alpha coherence between lef…
-
Ok, I'll put SRB2 on Cz, and Bias on Fz (that's available on my cap). I think my understanding of SRB was wrong. I've worked with Biosemi before, where the software shows the channels as follows: Fp1-A1 Fp2-A2 F3-A1 F4-A2 Etc The A channels were su…
-
Thanks William and Bill. I'll be trying both of your suggestions today. First by splicing to the P-pins to demonstrate to Prof that the setup works, and in mean time I'll find a programmer to adjust widget for software re-referencing. I'm using…