ZeroWitOne
ZeroWitOne
About
- Username
- ZeroWitOne
- Joined
- Visits
- 85
- Last Active
- Roles
- Member
Comments
-
Hi Wjcroft, Thanks, to be honest i thought you guys took care of that. was trying to avoid more hardware work-- was relieved after the soldering!. Regards, Ahmed
-
Hi, Its either the daisy module or the board. When I connect the reference (SRB2) in the daisy module, i get correct EEG readings for the channels connected in the daisy, and railed for the main board, and vice versa. Please if you know why i…
-
Ok, if by any chance someone had the same problem with firmware 2.0. Firmware 2.0 isn't going to work with the openbci_gui you have for the older version. The protocol has changed and probably you will need to write a new driver.
-
Actually i upgraded to firmware 2.0. Seems to have fixed it (not sure as something else came up), now i have a problem with the sample ID stuck. to 65 !!!