Saima
Saima
I am using OPENBCI EEG cap (cyton and daisy board).I am trying to connect my Electrodes with boards. but i am unable to connect it properly and i couldn't find any connection with these four pins.
About
- Username
- Saima
- Location
- Pakistan
- Joined
- Visits
- 86
- Last Active
- Roles
- Member
- Location
- Pakistan
Comments
-
so do you recommend me to fix notch filter at 50 ???
-
Yes i activated filter button in OPENBCI GUI before starting data stream....also settled the notch filter at 60 and band pass at 0.5 to 45. Do i need to make vert Sclae at Auto rather than 200uV... Thank you so much in advance
-
-
hello wjcroft I couldn't get any reply from there ...Can i share plot of collected data so u may guide me if Data quality seems to be OK ....!Kindly guide ...Its just a 2 second data and five second in which channel 1,2, 9,10,11,and 12 were wet. If…
-
i am unbale to upload .mat file here can anyone please guide what to do
-
Sir can you please guide do i need to keep only one stream opened on OpenBCI gui...I did all three streams in Time Series and EEG data as shown in the picture attached
-
I have plotted the OPENBCI .TXT file in EEGLAB properly, but as in my experiment i will have to collect data using LSL in matlab as i need to show the visual stimuli simultaneously. I have used the code mentioned below to collect data but its plot i…
-
I followed Irene tutorial to open OpenBCI .txt file in MATLAB and separated its AUX and channel data as Irene did ...and it worked wonderfully .Now i will read more tutorial as i have few stimulus videos and i will collect data using LSL ...... Tha…
-
The code i shared above to open OPENBCI .TXT file in matlab has been taken from "https://irenevigueguix.wordpress.com/2016/04/22/loading-openbci-datasets-in-eeglab/" tutorial. but i will look for any filtering technique has been shared in this tutor…
-
Step # 01: I just use this code to open .txt file in matlab and function [data] = open_files() % Prompt user for filename [fname, fdir] = uigetfile( ... { '*.txt*', 'Text Files (*.txt*)'; ... '*.xlsx', 'Excel Files (*.xlsx)'; ... …
-
I simply opened OpenBCI saved file in ".txt" format in EEGLAB and plot its channel data ony....no processing no filter just EEGLAB channel plot command
-
ok......Thank you so much for your time and support
-
Wiliam ,Hi I had adapters with which i connected the rest of the cables circled with blue in the image but i have some black pins left to connect with the boards circled as yellow in the image and some electrodes wire which need to be connected to…
-
Wiliam ,Hi I had adapters with which i connected the rest of the cables circled with blue in the image but i have some black pins left to connect with the boards circled as yellow in the image and some electrodes wire which need to be connected to…
-
Using a similar cap and i was also feeling that i am the only one using this cap....I do wash my cap with electrodes but feeling a stupendous issue of impedance in it