Edw_gabriel
Edw_gabriel
About
- Username
- Edw_gabriel
- Location
- Buenos Aires Argentina
- Joined
- Visits
- 11
- Last Active
- Roles
- Member
- Location
- Buenos Aires Argentina
Comments
-
Hello! Thank you very much for the quick answer. We tested with a wired mouse and it works ok. No problem. Thanks again for your help!
-
Thank you very much for the information! I confirm that we look at the other board and the firmware version is v3.1.1. We tried to change the channel with the latest version of SW GUI and it worked. When we had tried the previous version of GUI, the…
-
Hello! Good evening, excuse my delay in answering. I was with a lot of work. According to the GUI, the version is v3.1.1.
-
OK! I tried many but many times, in a moment the load went well, I am more than happy. We are going back to try to change the channel from the latest version of GUI to see if we succeed in not crossing communications.
-
Goodnight! Thank you very much for the quick answer. I tried updating the channels from the GUI but it didn't work. Then they recommended me by e-mail (a few months ago) to do the following: "You can change the channel by re-programming the do…