Darwinz
Darwinz
About
- Username
- Darwinz
- Location
- France
- Joined
- Visits
- 25
- Last Active
- Roles
- Member
- Location
- France
Comments
-
Hi William, Thanks for all the advice. Here is a sample of what I'am able to look at using 8 channels EEG with ThinkPulse electrodes, 5 potentiometer to record hand mouvement and 3 EMG sensor for forearm. Everything seems to work according to wh…
-
Hi William, Thank you for your answer. After some modification I should use a combination of resistor to reach 6590000 Ohms. here is the new diagram : As I understand, ExG Pins are the one that are already used by the 8 electrodes. I also …
-
Thank you for your answer. Before going into physical adjustement I would like to be sure about what i'am doing. So I made a little schematic to see where i'am planning to connect things in the same way as you suggested (I think). PS : I'am using …
-
Hi William, Thank you for your fast answer. For now i've try the first part where i send voltage value from 0v to 3.3v to the D11 pin on Cyton Board (Analog read mode being activated). Here is a little sample of what I get with potentiometer on a…