Comments

• Hello @wjcroft! Sorry for long delay in answer, I was on vacation. I've managed to solve problem with signals - the core of problem was in incorrect pins connection on board. But I still have in console warnings like: [brainflow_logger] [warning]…

  in Wrong end bytes warning and strange signals Comment by ColdDeath August 2021
• Hello @wjcroft! Thank you for your answer and support. I'm using Debian GNU/Linux 11 (bullseye). Changing ports was not solved problem. As I've mentioned in first post, in the Official OpenBCI GUI all is okay with signals, even with /dev/rfcomm0…

  in Wrong end bytes warning and strange signals Comment by ColdDeath July 2021
• We have checked electrodes and wires and get such signals. Could you see please and say is it more looks like EEG? Video attached.

  in Wrong signals which doesn't similar to EEG Comment by ColdDeath October 2020
• We have checked the following: * reaction to disconnection and touching the electrodes with fingers: we see reactions on graph; * batteries; * all contacts are intact, no any short circuits; * we have used paste at all channels; * we have c…

  in Wrong signals which doesn't similar to EEG Comment by ColdDeath October 2020
• Billh and wjcroft thank you so much for your advices! I will try all that you have been written above today and will write result. wjcroft, this board was bought at November 2019 but only recently has been used.

  in Wrong signals which doesn't similar to EEG Comment by ColdDeath October 2020