Comments

• I forgot...The 8 channel by itself works just fine.

  in 16 channel daisy worked initially, now getting only 8 channels Comment by Brightday2 June 2015
• Biomurph,At first i had this time out message. I wasnt able to load the 16 channel interface on processing. I sent the daisy to repair. You repaired it and sent it back to me. Now I can acces the 16 ch interface but it only shows the first 8 channel…

  in 16 channel daisy worked initially, now getting only 8 channels Comment by Brightday2 June 2015
• Mine works fine with 8 channels, but it does not recognize the dasy. when i select the 16 channels in processing. that happens after i have sent it to repair to openbci and got it back one week ago or so. So apparently it should work fine! Firmware?

  in 16 channel daisy worked initially, now getting only 8 channels Comment by Brightday2 May 2015
• in my processing log says no dasy to attach...should I check the soldering? Any idea based on the info i have copied?

  in 16 channel daisy worked initially, now getting only 8 channels Comment by Brightday2 May 2015
• OpenBCI_GUI: mousePressed: mouse pressed CPmousePressed Playground: isMouseInButton: attempting OpenBCI_GUI: mouseReleased: mouse released CPMouseReleased: CPmouseReleased start... ControlPanel: CPmouseReleased: init ControlPanel: CPmous…

  in 16 channel daisy worked initially, now getting only 8 channels Comment by Brightday2 May 2015
• Here i attach the attempt made by Openvibe to connect to the 16 ch module https://plus.google.com/photos/115794257441336975912/albums/6152218975997072049/6152218982468968210?hl=es&pid=6152218982468968210&oid=115794257441336975912

  in 16 channel daisy worked initially, now getting only 8 channels Comment by Brightday2 May 2015
• I have the same issue. After sending my dasy module to repair, now the blue light turns on when i attach the daisy module to the main 8 channel OpenBci board. And now, and not before, the OpenBCI GUI connects with the 16 channel option without sayin…

  in 16 channel daisy worked initially, now getting only 8 channels Comment by Brightday2 May 2015
• However....isnt Crossover a wine version actually? I thought so. i've changed the name of the device name (spacey..)  Now It responds like that: ln: /Users/Ray/Applications/CrossOver/BrainBay/com1: File exists anyhow...i've managed to run i…

  in BrainBay, install, neurofeedback tutorial Comment by Brightday2 March 2015
• Hi,  I'm having problems connecting the dongle with the com port in Mac having installed BrainBay with Crossover, i'm trying: ln -s /dev/tty.usbserial-DN00969W /Users/Ray/Applications/CrossOver/BrainBay/com1 It says  Not such file or director…

  in BrainBay, install, neurofeedback tutorial Comment by Brightday2 March 2015
• I had the same problem. It could only recognize the main 8 channel module (which works just fine). It seemed to me that the OpenBCI GUI did not succeed to connect. After I read this conversation I tried processing. BUT!! This time the main module's …

  in Daisy board not recognized, soldering issues? Comment by Brightday2 March 2015