Andrea
Andrea
About
- Username
- Andrea
- Location
- New York
- Joined
- Visits
- 801
- Last Active
- Roles
- Member
- Location
- New York
Comments
-
Hi @SSS, They are all the same. The size will depend on the frame you print yourself.
-
Hi! The problem was addressed and the docs pages should be up now.
-
Hi! We sent some to our warehouse today! The inventory has been updated accordignly, thank you for letting us know!
-
Hi @clamport, The battery packs have a two pin JST-PH connector. If you lost your battery pack, I would recommend you purchase batteries from Adafruit or Sparkfun: * (2x) Lithium Ion Rechargeable Battery Pack (500mAh) from [Adafruit](https://www.…
-
You don't need the Bluetooth Dongle. You only need it if you are working with the Ganglion. The Cyton board already has a dongle included.
-
Hi Paul, 1) The Ultracortex and the Gold Cup Electrodes are two separate things and are not used together. * The Mark IV has dry spiky electrodes that are held together by a frame, because the electrodes are "dry electrodes" they don't require pa…
-
The manufacturer of the Paste is Weaver. You should contact them directly: http://www.weaverandcompany.com/ten20.html
-
Hi @hackintoshlover, Are you only having problems with the frame or also with other parts? Have you tried printing the headset in quarters? That usually helps. Also make sure to slow down the speed of the printer. Unfortunately we don't have any 2…
-
Hi @ls870825, Yes it can! You can look at an example on our tutorial pages.
-
Hi @whatever, I just uploaded the full frames here: https://github.com/OpenBCI/Docs/tree/master/assets/MarkIV/STL_Directory/Mark_IV_Frame
-
Hi @jussijaatinen, Could you please send us an email at [email protected] with your order number? Best, Andrea
-
Hi @jussijaatinen, The label and the invoice should have the same customs value.
-
Hi, The value on the invoice should equal your Kickstarter pledge! Best, Andrea
-
Hi @NeuroLyfe, We don't have a video, but you can check our getting started guide: http://docs.openbci.com/Tutorials/02-Ganglion_Getting Started_Guide All you need is some Gold Cup Electrodes and some EEG Paste to get started, no need for…
-
Hi @erasmus, We posted a Kickstarter update on Friday regarding the boards! We received a 'Top of Production' from our manufacturing partners at Worthington Assembly (WAi) last week! They sent us 4 boards, and they looked great, however we fou…
-
Hi @kito, In the original processing GUI it looks like the comma is appended on line 82 of dataFiles.pde. You can try changing that line to the delimiter you need for your project.
-
Hi @obbrc, We are planning to start shipping the first boards at the end of the month. If you place your order now your board will be shipped at the beginning of December.