AdamMiltonBarker
AdamMiltonBarker
About
- Username
- AdamMiltonBarker
- Location
- spain
- Joined
- Visits
- 46
- Last Active
- Roles
- Member
- Location
- spain
Comments
-
Hi thanks for tagging biomurph, to be honest I am totally frustrated All links on this forum that link to documentation are broken so trying to find answers is pretty much impossible, the all just link to the welcome page. The V1 firmware upload ti…
-
I take it the board is bricked or something I have no activity at all 2 / 7 as before both of these channels say RAILED. Any one else have any suggestions please.
-
None of that has helped. still unable to get the software on the device.
-
Sorry I see the link took me to the final page of the post, checking out the rest now.
-
Having trouble understanding what that link was saying: https://github.com/chipKIT32/PIC32-avrdude-bootloader ; We are to use that instead of Arduino IDE ?
-
Sorry bit lost as did not have to do this last time. https://github.com/chipKIT32/PIC32-avrdude-bootloader We are to use that instead of Arduino IDE ? Again the following link is broken: http://docs.openbci.com/hardware/01-OpenBCI_Hardware…
-
Yer that does not appear to help as the links linked there are dead, but if it is the install guide yes I have followed that.
-
Here is the full output Programmer for Microchip PIC32 microcontrollers, Version 2.0.183 Copyright: (C) 2011-2015 Serge Vakulenko Adapter: STK500v2 Bootloader Program area: 1d000000-1d1fffff Processor: Bootloader Flash memor…
-
Target not found stopped after I unplugged the dongle and put it back in but cannot get around Verify flash: ................................................Read page failed. invalid reply checksum
-
No I am uploading the V1 which I downloaded the first time I was uploading.
-
Verify flash: ................................................Read page failed. invalid reply checksum Now I am getting no target found constantly
-
Hi thanks for the reply, it failed checksum every time, on testing channel 2 and 7 from http://docs.openbci.com/Tutorials/01-Cyton_Getting Started_Guide there is no activity at all and 2 and 7say RAILED, I am hoping this is because the checksum fail…
-
OK so found this but all of the links just go to the welcome page. https://github.com/OpenBCI/OpenBCI_32bit_Library/blob/master/UPGRADE_GUIDE.md
-
Hi I am trying to get this sending data to the dongle as normal, I have contacted alfahad numerous times but have not managed to get reply as yet. If anyone can help with this would be great I am in the process of creating a plugin for MQTT and wri…
-
Hi thanks for the reply the issue was using a newer version but going back to 1.6.5 it uploads now but the whole process is very temperamental.
-
After 2nd attempt I get Program flash failed. Followed http://docs.openbci.com/tutorials/02-Upload_Code_to_OpenBCI_Board exactly. Any ideas guys.
-
Never mind it was that however now getting Read page failed after uploading
-
On uploading with 1.6.7 I get the following error? Does anyone know if this is the reason for using 1.6.5 or any reasons why not to use 1.6.7 please. exec: "-w": executable file not found in %PATH% Error compiling.
-
No not as far as I know that is why I thought it could be related to my location. Will do thanks. Also sorry I see on the Github now about Minim
-
Thanks mate I did, maybe a note should be put on the download page so new users don't have to search, didn't see anywhere mention about the minim folder, on the git hub it doesn't mention that, just a suggestion. I have it installed and been testing…
-
Solved with links above and additional info. Your documentation needs updating on your tutorials, in addition to above info you also need to copy minim into the libraries folder.
-
I cannot unzip the 64 bit download on Windows 10 every ZIP software tells me the folder is invalid, bit of an anti climax after waiting 3 months due to customs in Spain, any ideas guys?
-
After almost three months and 300 euros lighter, the Spanish customs have finally released the BCI equipment to me so really looking forward to this now, we actually won the AT & T Dallas Foundry hackathon using the kit before my friend sent it…
-
Thank you perfect/