OpenBCI Forum

Discussion	Started By	Replies	Views	Most Recent
Opening OpenBCI on Windows 10 in OpenBCI_GUI	tigerbow1125 July 2019	1	258	wjcroft July 2019
receiving Wifi Shield data from Cyton, in C# in Wifi Shield	RadaMike July 2019	10	504	RadaMike July 2019
Wifi shield and python openbci in Wifi Shield	ai20 July 2019	0	140	ai20 July 2019
which cyton and wifi-shield firmware and openbci gui version works well together? in Wifi Shield	khofstadter July 2019	7	160	khofstadter July 2019
What exactly do tracers do in a electrode lead cables? in Electrodes	Ujjwal_Cortex July 2019	1	102	wjcroft July 2019
can comb electrodes be used with snap connector cables? in Electrodes	siddhant July 2019	1	338	wjcroft July 2019
Cyton Getting Started Guide, "Hardware Settings" screenshot incorrect in Cyton	MoisesDS July 2019	1	145	wjcroft July 2019
fft signal jumps around 50hz - what does this indicate? in Wifi Shield	khofstadter July 2019	7	200	khofstadter July 2019
are there issues with having the wifi-shield on Cyton while recording via serial/bluetooth/usb? in Wifi Shield	khofstadter July 2019	3	109	khofstadter July 2019
Problems while measuring on Windows 7, but not Windows 10. in OpenBCI_GUI	zfmeng June 2019	23	307	wjcroft July 2019
Latency Timer, Windows control panel setting in Software	wjcroft November 2014	1	3.4K	Thomas July 2019
Using the ganglion board to read EMG detecting subvocalizations for biofeedback to train suppression in Research	JMCooper July 2019	2	226	wjcroft July 2019
error in openbci_lsl.py in Software	zmzm July 2019	0	85	zmzm July 2019
OpenBCI support for Bitalino Low-Cost Toolkit? in Software	Peter_Gamma July 2019	4	570	Peter_Gamma July 2019
how does low battery level affect the signal? in Cyton	khofstadter July 2019	4	205	khofstadter July 2019
multi person, multi channels SSVEP on OpenBCI in Cyton	SeventeenChen July 2019	13	196	Billh July 2019
SD card stops recording after 4 minutes in Cyton	mkarn3yru July 2019	2	63	wjcroft July 2019
what is the relationship between high impedance on EEG channels and 50/60hz noise? in Electrodes	khofstadter July 2019	7	2.5K	wjcroft July 2019
Random accelerometer data, no EEG, after firmware upgrade from V1 in Cyton	MatthiasWill June 2019	2	105	MatthiasWill July 2019
process SSVEP data online versus offline in General Discussion	manuel_law June 2019	3	315	wjcroft July 2019
suggestions on realtime SSVEP in Python or Matlab? in General Discussion	JDavid July 2019	7	428	wjcroft July 2019
Help with "Control Arduino Using Your Brain and OpenBCI“ tutorial in Cyton	andylamcuhkpsy July 2019	6	256	retiutut July 2019
is continuous monitoring of impedance possible while recording EEG? in Cyton	khofstadter July 2019	2	120	khofstadter July 2019
different between the firmware 3.1.1 and 3.1.2 on the board when working with wi-fi shield? in Software	khofstadter July 2019	3	184	khofstadter July 2019
What is the Cyton Boards Maximum Sample Rate? in Cyton	RadaMike July 2019	2	100	RadaMike July 2019
I just bought a 8 bit openbci board can I use Python to program it in Hardware	_z_cole June 2019	1	155	wjcroft June 2019
Ganglion test with square wave input, droops somewhat in Ganglion	mefox6 June 2019	13	277	mefox6 June 2019
I can not make the PLAYBACK work in Cyton	tatiane_aurora June 2019	3	87	retiutut June 2019
papers using OpenBCI hardware / headware ? in General Discussion	zfmeng June 2019	4	166	zfmeng June 2019
SRB and references in Cyton	bmarkus April 2019	15	1.6K	wjcroft June 2019