CytonDaisy SRB Connection
DreamBigDreamLucid
CT USA
in Cyton
Hello All,
Question regarding the SRB Pin for Cyton+Daisy.
In the description under Getting Started it reads, "Connecting the Electrode Cap to the CytonDaisy
Use the y-splitter cable that came with your CytonDaisy to "gang" together the bottom SRB pins on the Cyton and the Daisy module, as shown below. This will be the reference electrode for the other electrodes on the subject's head."
but the photograph looks like the bottom SRB of the Cyton Board is used and the TOP SRB of the Daisy.
Can anyone verify correct placement? Much appreciated!
Comments
Hi Dream,
Oops, you're right, the photo showing the Y-splitter with Daisy is wrong. The bottom pins are the ones to be bridged, as stated in the text. Mentioning Richard @retiutut.
Regards, William
I've created an issue on the Documentation repo to make sure this gets fixed soon: https://github.com/OpenBCI/Documentation/issues/41
Fixed!
https://docs.openbci.com/docs/04AddOns/01-Headwear/ElectrodeCap#connecting-the-electrode-cap-to-the-cytondaisy
Thanks!