32-bit setup

denisfitzdenisfitz
in Cyton
I just received my 32-bit board.  My sense is that the 8-bit setup and testing instructions are appropriate to use, but could someone who knows give the all clear?  For example, change the subheading in the getting started Doc from 8-bit to 8-bit or 32-bit would be sufficient and require minimal effort.

Comments

  • biomurphbiomurph Brooklyn, NY
     hi denisfitz,
    yes, the set-up is the same if you're using the Processing Sketch.
    if you want to play with the firmware, you must use the mpide from chipKIT to flash new code to the 32bit board.

    Our guides are in process of being built, please excuse the delay!
    We just finalized the firmware, and are now switching hats to guide makers!
Sign In or Register to comment.

© Vanilla Keystone Theme 2026