Cyton

Sub-category for the Cyton 8/16 channel system

Discussion	Started By	Replies	Views	Most Recent
Help with commands to OpenBCI Cyton+Daisy	a1eks April 2018	3	367	wjcroft May 2018
have to plug and unplug the Cyton dongle (few times) until it works	mathieu May 2018	3	224	wjcroft May 2018
open_bci_v3.py gets samples after board is turned off	jman May 2018	1	130	wjcroft May 2018
Error upgrading firmware	towercomp96 April 2018	7	254	towercomp96 May 2018
USB dongle error	hugorogz March 2017	4	522	ks1974in May 2018
firmware update failed on version 1.x.x for wifi shield / plib.h	soojcho April 2018	10	410	laerciosilvajunior May 2018
Python not streaming	soojcho April 2018	0	145	soojcho April 2018
Anyone from Berlin, Germany using a Cyton?	ulf2us November 2017	21	615	ulf2us April 2018
Stream reads different from data format in the specs (Byte2 is always 0x41)	dmontezano April 2018	14	398	dmontezano April 2018
My cyton light no work after it connected the wifi shield	profeell April 2018	0	110	profeell April 2018
"unable to attach daisy" error from GUI	Blaine.allen April 2018	1	124	Blaine.allen April 2018
Placing triggers in data with button press 1 2	KCDTyler September 2017	48	3.5K	alitos April 2018
Really bad noise only when I am connected.	AdamMiltonBarker February 2017	25	1K	wjcroft April 2018
Frequency Range of Cyton 8 channel 32 bit board	faheemersh March 2018	4	435	faheemersh March 2018
Timestamp jump in the raw data	rittmo March 2018	4	413	Billh March 2018
convert raw data stream to another acquisition hardware stream?	ssart March 2018	7	484	wjcroft March 2018
SD Card saves Data without dongle Connection?	jeyem March 2018	1	207	wjcroft March 2018
Required sampling rate for EMG	Yash March 2018	6	2.5K	wjcroft March 2018
channels 9-16 railing, y-cable issue? 1 2	slackconsulting March 2018	31	710	slackconsulting March 2018
SRB2 off in OpenBCI, how to process it in txt/csv files?	skiria8 February 2018	3	184	skiria8 March 2018
All channels railed	ananya February 2018	2	408	pushtheworld March 2018
Sample rate of 1kHz for EMG cursor control, How?	skiria8 February 2018	5	301	pushtheworld March 2018
No data after firmware update -> chipKIT core issue 1 2	CJP February 2018	31	973	pushtheworld March 2018
"Failure: Communications timeout - Device failed to poll host"	JimmyBrasseur February 2018	9	522	pushtheworld March 2018
microcontroller programming, cyton, daisy, wifi	spspnu March 2018	1	183	wjcroft March 2018
Max voltage I can input to a Cyton channel?	mark.o.s November 2017	16	1.9K	dillon.huffman February 2018
What impedances are to expect using the standard dry electrodes?	jeyem February 2018	6	713	jeyem February 2018
Railing on 2, 5, 9, 12, and 14 - readings seem un-reliable 1 2	GeneralFox August 2017	41	1.5K	pushtheworld February 2018
RFduino radio firmware update with Arduino Uno? How?	khofstadter November 2017	5	479	khofstadter February 2018
Removing the RFduino chip from Cyton mainboard	mgpro94 January 2018	5	455	danmaxic February 2018