Cyton

Sub-category for the Cyton 8/16 channel system

Discussion	Started By	Replies	Views	Most Recent
Commands to turn on/off SRB2 and BIAS for a channel in cyton 32b	skiria8 September 2018	2	222	skiria8 September 2018
what command can let me start to record SD card only and no wifi shield.	profeell September 2018	0	191	profeell September 2018
Cannot connect Cyton board	Rimma September 2018	0	141	Rimma September 2018
timestamp vs sample id vs sampling rate	poddubny August 2018	5	788	grimdragon September 2018
Why not publish a new firmware and SDK to support high sample rate SD card recording only?	profeell August 2018	0	97	profeell August 2018
I can't understand "spikes of noise" in my EMG signal	Bonzo August 2018	7	587	Bonzo August 2018
BLE OFF PC switch purpose	s_arty August 2018	3	448	wjcroft August 2018
USB Dongle removal while recording to SD Card?	leevonkraus August 2018	3	111	s_arty August 2018
Add Clicker data	Zen007 August 2018	1	148	leevonkraus August 2018
Mark IV headset cyton+daisy 1 or 2 y splitter cables?	ai20 August 2018	2	110	ai20 August 2018
Cyton + Daisy board cover	ai20 July 2018	1	202	wjcroft July 2018
Averaged or single reference electrode?	ryans July 2017	16	1.5K	naz July 2018
Linux / Windows does not recognize the dongle when I connecting it	Angelo_GS July 2018	2	112	wjcroft July 2018
Similar Result in each channel (Time Domain and Frequency Domain)	nugroho_budi July 2018	19	836	nugroho_budi July 2018
Measurement difference between electrodes 1-8 and 9-14	jessicaloke July 2018	1	192	wjcroft July 2018
Cyton blue LED does not turn off with power switch	ayman_anwar July 2018	3	149	wjcroft July 2018
cracked my OpenBCI power switch, suggestions?	Sifeng May 2015	4	331	wjcroft July 2018
questions on Cyton sampling frequency, GUI, signal processing 1 2	faheemersh January 2018	33	1.4K	ElisabethSmithie July 2018
run 2 OpenBCI boards simultaneously to get 16 or 32 channels	md_zee April 2015	4	898	wjcroft July 2018
Hardware Settings on the Cyton	GeneralFox June 2018	5	945	wjcroft July 2018
OpenBCI "Clipping" Issue	naz July 2018	6	211	naz July 2018
Cyton dongle not connecting with the cyton board.	Sahana May 2018	12	1.5K	wjcroft July 2018
Where can I buy batterys in Australia?	otoko_tenshi June 2018	6	230	wjcroft June 2018
ATmega firmware programming tutorial?	BrainCurious June 2018	8	297	biomurph June 2018
Turning on SRB2 and setting to use SRB1 (Yes) in Python	srakrn June 2018	1	287	wjcroft June 2018
Best connection for 1 channel EEG: differential or SRB2?	compujohnny June 2018	7	684	compujohnny June 2018
Solder header to board for firmware update	khofstadter February 2018	19	523	wjcroft June 2018
BioEra with original Kickstarter 'Cyton'	arty_g June 2018	1	179	wjcroft June 2018
Issue with periodical abnormal signal on channel N1P	aaronjoh May 2018	9	306	biomurph May 2018
Cyton V3 Firmware upgrade, detailed steps?	maggolini May 2018	3	1.2K	wjcroft May 2018