These are written for users who are only mildly familiar with Python and Windows software installation. They cover Python 3.11 installation, dependencies, Control Center launch, stimulus selection, Me

I've been working with EDF recordings for EEG and neuroscience projects and kept running into the same problem: most mature EDF tooling assumes Python or native software, while there are comparatively

what is the estimated delay time between the event at the EEG channel, and the triggered feedback? Just curious because in typical neurofeedback apps (BioEra, BrainBay, Bioexplorer, etc.) this usually

In a much simpler example neurofeedback program that say just rewards a threshold at a given scalp 10-20 location, what is the estimated delay time between the event at the EEG channel, and the trigge

This paper introduces MNE-RT, a Python package designed for real-time neural feature extraction from magne-toencephalography (MEG) and electroencephalography (EEG) signals in Brain-Computer Interface

I’d like to introduce MNE-RT (link), an open-source Python package for real-time M/EEG signal processing, built on top of MNE-Python and MNE-LSL. It covers the entire closed-loop pipeline in a single,

What is the separate app written in? Something like Python, that runs everywhere? Or a webapp? Does it expect an EDF with 2 or 4 channels at a time?

to remain connected, I have tried closing all python programs running in the background in hopes of terminating a previous instance of the GUI that may have remained active. I’ve also tried resetting

The gap I'm trying to fill: source localization algorithms are well-validated and the computational feasibility of running them in real time on a GPU has been demonstrated in published work. But as fa

Sorry for my confusion regarding your app language. When you said 'browser-app' I assumed you were using javascript or typescript. I now see your app is entirely Python based, so obviously those are t

* my own Python application using pyOpenBCI

to figure out what is the delay between your Python sending marker and it showing up in the recording. Could be tens of milliseconds. Hard to say which has more latency, using the GUI marker, or the

Yes using Brainflow and your language of choice (Python, Java, etc.)

I'm currently trying to measure the impedance of my Cyton board channels in Python using Brainflow. However, I consistently get this error:

reliable, maybe I can use the same logic in my Python script.

reliable, maybe I can use the same logic in my Python script.

because I manually installed brainflow via a python command before?

normally. Then, filter the Ganglion board in python through brainflow and display the data. Then the above-mentioned problems were discovered. The following is the code for my filtering

I am currently using Python and the BrainFlow library to obtain electroencephalogram (EEG) signals from the Ganglion board. I have obtained a total of 5 seconds of EEG data. But I found that there was

I am currently using Python and the BrainFlow library to obtain electroencephalogram (EEG) signals from the Ganglion board. I have obtained a total of 5 seconds of EEG data. But I found that there was