I guess I'm just trying to be helpful. Profeel did finally get his SD card recording to work, as well as his Wifi Shield. So that's progress.

to play it back in realtime via a modified sound card output, that is capable of very low frequencies in the EEG range. This can be done by removing the output coupling capacitors that impose a high

I'm not clear WHY you are using the Wifi Shield to initiate your SD card recording session. You can do that just with the serial connection / dongle. The serial connection will not see the faster samp

I used the WiFishield and SD card and get 4000Hz data, but I still can't get 8000HZ and 16000Hz data.

Did you get the SD card recording to work? That should work at the higher speeds, providing you have a decent brand sdcard.

Is there a script available (C, python, etc) to convert the SD card file (hex format) to voltages, etc without having to use the OpenBCI GUI?

Dongle is not used when connecting GUI via Wifi. SDK codes for Cyton are primarily used for dongle serial port connection.

1. The Openbci SDK give the information: IMPORTANT! The Cyton with USB Dongle cannot and will not stream data over

You can get 2000 or 4000 with the SD card, did you try that?

Regarding your SD card recording for 15 minutes, you need to send CAPITAL S, not lowercase s. Is that what you sent?

-I collected to the SD card while logging on my screen.  I'm having problems getting no files sometimes despite what seems to be quality 16gb Sandisk.  However, I finally logged a glitch on my screen

EEG-data. I have two way to get it by your guide, one is record the data to SD

[original thread title: "Do you release a standard configuration guide?"]

During the same time I also used the CSV format (SDconverted-2017-12-25_19-40-26.csv), and I cannot recall what needs to be done with these.  I have to convert these using the OpenBCI interface, corre

One problem I ran into - and I do not know if it is related at all - was that while doing a test run with SD-card saving enabled, it only registered approx. 18 minutes instead of 30 minutes as I had c

Sorry, I tried many times, but I can't read know the EEG-data, I still use 8000HZ sample rate to get the eeg-date, please forgive my stubbor, I need convert the eeg-data to WAV format data next step i

re: changing serial port baud rate: NO, you will only get the faster sample rate to the SD card, not the serial port.

I have a questions about the SD card to

The hex format of the SD card data is explained here,

Sorry to much, my english is too bad, the second question is: how many ways can convert these hexadecimal files in the SD card to ‘normal’ data files?