Longer electrodes

jussijaatinenjussijaatinen
in Headware
Hi,

Could it be possible to produce longer electrodes, because now in some locations electrodes don´t reach the head? Maybe my head is just wrong size, because I have tried with medium and large size helmet (Mark IV). It´s impossible to get all the electrodes (16) working at the same time. In practice I would need this part couple of centimeters longer:


Jussi Jaatinen

Comments

  • wjcroftwjcroft Mount Shasta, CA
    https://www.adafruit.com/categories/224
  • jussijaatinenjussijaatinen
    No, no, no. I meant octabolts.
  • wjcroftwjcroft Mount Shasta, CA
    Sorry, I'll forward you an email thread about the longer octabolts. 

  • ThreeFormThreeForm NYC
    Hi Jussi,
    You can find longer Octabolts in this folder on the OpenBCI GitHub:

    M4 Extended Parts

    Let me know if you have any other questions or need them printed.
      -Aaron
  • ThreeFormThreeForm NYC
    I should also add that there is a longer Eholder that adds another centimeter. You would need a slightly longer screw to complete the assembly.
  • jussijaatinenjussijaatinen
    Is it possible to order them from OpenBCI shop? 

    Jussi
  • ThreeFormThreeForm NYC
    OpenBCI uses a third party for distribution, so adding all the part
    variants is not practical yet. One option would be using a service
    bureau like Shapeways. Obviously printing these parts using SLS nylon is
    far more expensive, but if you only need a couple of bolts this is an
    easy solution. I've added the Ultracortex long bolt to my Shapeways shop if you'd like to order it from there.
Sign In or Register to comment.

© Vanilla Keystone Theme 2025